Cleaning the glass cooktop – Summit REX242W User Manual

Page 29

Advertising
background image

29

Cleaning the glass cooktop.

(on some models)

Normal Daily Use Cleaning

Clean your cooktop after

each spill. Use Ceramic

Cooktop Cleaner.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use

scrub pads other than those recommended.

Heavy Burned-On Residue

Note: Do not use a dull or

nicked blade.

ONLY use Ceramic Cooktop Cleaner on

the glass cooktop. Other types of cleaners

may not be as effective.
To maintain and protect the surface of

your glass cooktop, follow these steps.

1. Before using the cooktop for the first

time, clean it with Ceramic Cooktop

Cleaner. This helps protect the top and

makes cleanup easier.

2. Daily use of Ceramic Cooktop Cleaner

will help keep the cooktop looking

new.

3. Shake the cleaning cream well. Apply

a few drops of Ceramic Cooktop

Cleaner directly to the cooktop.

4. Use a paper towel for Ceramic Cook-

tops to clean the entire cooktop sur-

face.

5. Use a dry cloth or paper towel to re-

move all cleaning residue. No need to

rinse.

NOTE: It is very important that you DO NOT

heat the cooktop until it has been

cleaned thoroughly.

Safety Instructions

Operating

Instructions

Care and Cleaning

Troubleshooting Tips

Consumer Support

Installation

Instructions

1. Allow the cooktop to cool.
2. Spread a few drops of Ceramic Cook-

top Cleaner on the entire burned resi-

due area.

3. Using the included Cleaning Pad for Ce-

ramic Cooktops, rub the residue area,

applying pressure as needed.

4. If any residue remains, repeat the steps

listed above as needed.

5. For additional protection, after all resi-

due has been removed, polish the en-

tire surface with Ceramic Cooktop

Cleaner and paper towel.

Use a Cleaning Pad for Ce-

ramic Cooktops.

1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper

at approximately a 45º angle against

the glass surface and scrape the soil. It

will be necessary to apply pressure to

the razor scraper in order to remove the

residue.

3. After scraping with the razor scraper,

spread a few drops of Ceramic Cook-

top Cleaner on the entire burned resi-

due area. Use the Cleaning Pad to re-

move any remaining residue.

4. For additional protection, after all resi-

due has been removed, polish the en-

tire surface with Ceramic Cooktop

Cleaner and a paper towel.

Advertising