Barco R9001330 - Manual (Page 45)

Connections
Connections
7-4 5975288 BARCOGRAPHICS 8200 110497
5975288 BARCOGRAPHICS 8200 110497 7-4
Push the Control disk up or down to highlight Installation and press
ENTER to display the Installation menu.
EXIT returns to operational mode.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
CONVERGENCE
CONFIGURATION
INPUT SLOTS
INTERNAL PATTERNS
Use the control disk to select Input Slots by pushing it up or down and
press
ENTER . The internal system will scan the inputs and displays
the result in the Input Slots menu.
INPUT SLOTS
1. RGB-SS[CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
Push the control disk up or down to select the corresponding (video
or S-video) input slot number.
To change the priority between Video and S-Video, press
ENTER
key to toggle.
Push the Control disk up or down to highlight Installation and press
ENTER to display the Installation menu.
EXIT returns to operational mode.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
CONVERGENCE
CONFIGURATION
INPUT SLOTS
INTERNAL PATTERNS
Use the control disk to select Input Slots by pushing it up or down and
press
ENTER . The internal system will scan the inputs and displays
the result in the Input Slots menu.
INPUT SLOTS
1. RGB-SS[CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
Push the control disk up or down to select the corresponding (video
or S-video) input slot number.
To change the priority between Video and S-Video, press
ENTER
key to toggle.