Barco R9001330 - Manual (Page 82)

Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497 11-17
Random Access Adjustment Mode
11-17 5975288 BARCOGRAPHICS 8200 110497
Size
Highlight Size by pushing the control disk up or down and press
ENTER to select.
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Fi xe d si de s
Horizontal s ize
a d j u stme n t
Vertical s ize
a d j u stme n t
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size,
for table mount configuration : the upper side of the image is fixed and
only the lower side can be moved to its exact position.
for ceiling mount configuration : the lower side of the image is fixed
and only the upper side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed
and only the right side can be moved to its exact position.
Hint : Before sizing the image, be sure that
- for table mount configuration the upper left corner is correctly
positionned on the screen. Use the Shift function to position this
corner.
- for ceiling mount configuration the upper left corner is correctly
positionned on the screen. Use the Shift function to position this
corner.
Example for table mount configuration
Size
Highlight Size by pushing the control disk up or down and press
ENTER to select.
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Fi xe d si de s
Horizontal s ize
a d j u stme n t
Vertical s ize
a d j u stme n t
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size,
for table mount configuration : the upper side of the image is fixed and
only the lower side can be moved to its exact position.
for ceiling mount configuration : the lower side of the image is fixed
and only the upper side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed
and only the right side can be moved to its exact position.
Hint : Before sizing the image, be sure that
- for table mount configuration the upper left corner is correctly
positionned on the screen. Use the Shift function to position this
corner.
- for ceiling mount configuration the upper left corner is correctly
positionned on the screen. Use the Shift function to position this
corner.
Example for table mount configuration