Barco R9001330 - Manual (Page 83)

Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497 11-18
11-18
Side keystone
Highlight Side Keystone by pushing the control disk up or down and
press
ENTER to select.
The side keystone adjustment is used to align the image if the
projector is mounted as a non standard projection angle.
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Push the control disk to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disk to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disk to the right. The number indication
below the bar scale will be positive.
Side keystone
Highlight Side Keystone by pushing the control disk up or down and
press
ENTER to select.
The side keystone adjustment is used to align the image if the
projector is mounted as a non standard projection angle.
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Push the control disk to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disk to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disk to the right. The number indication
below the bar scale will be positive.