Random access adjustment mode, Copy, Enter – Barco R9001330 User Manual
Page 75: Exit
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
11-10
11-10
Copy
To copy a selected file into a new file.
Use the control disk to select COPY and press
ENTER
. The Copy
selection menu will be displayed.
Use the control disk to select a file name and press
ENTER
to select.
The Copy menu will be displayed with the selected file name already
filled in in the 'From file name :' area and in the 'To file name :' area.
Select with or
then <ENTER>
<EXIT> to return.
COPY FILE
Filename
Src
Resolution
-----------------------------------------------------
pal .s01
1
675x278i
pal .c01
1
675x278i
secam .s03
3
675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or
<ENTER> to accept
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
Press
ENTER
to select the separate characters. Push the control
disk to the right or to the left to select the desired character. Change
that characters by pushing the control disk up or down. Numeric
characters can be entered directly with numeric keys on the RCU.
Press
ENTER
to confirm. The copied file is entered in the list of files.
Press
EXIT
to return to the Copy selection menu. No copies are
made.
Copy
To copy a selected file into a new file.
Use the control disk to select COPY and press
ENTER
. The Copy
selection menu will be displayed.
Use the control disk to select a file name and press
ENTER
to select.
The Copy menu will be displayed with the selected file name already
filled in in the 'From file name :' area and in the 'To file name :' area.
Select with or
then <ENTER>
<EXIT> to return.
COPY FILE
Filename
Src
Resolution
-----------------------------------------------------
pal .s01
1
675x278i
pal .c01
1
675x278i
secam .s03
3
675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or
<ENTER> to accept
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
Press
ENTER
to select the separate characters. Push the control
disk to the right or to the left to select the desired character. Change
that characters by pushing the control disk up or down. Numeric
characters can be entered directly with numeric keys on the RCU.
Press
ENTER
to confirm. The copied file is entered in the list of files.
Press
EXIT
to return to the Copy selection menu. No copies are
made.