Barco R9001070 - Manual (Page 105)

Service Mode
12-12 5975696 BARCODATA 2100 140798
Service Mode
12-12 5975696 BARCODATA 2100 140798
Change Language
Highlight Language by pushing the control disk up or down and press
ENTER to select the Language Selection menu.
For the moment, only English is available.
SERVICE
CHANGE LANGUAGE
75 Ω TERMINATION
DIMMING
I2C DIAGNOSIS
MORE ...
CHANGE LANGUAGE
ENGLISH
Select with ê or é
then <ENTER>
<EXIT> to return.
ENTER displays the Change Language menu.
EXIT returns to the adjustment selection menu.
75 W Termination
The RGB inputs (source 4 and source 5) can be terminated on 75 Ω .
Highlight '75 Ω Termination' by pushing the control disk up or down and
press ENTER to display the 75 Ω termination menu.
Select the corresponding input by pushing the control disk up or down
and press ENTER to toggle between [ON] or [OFF].
Note : when there is no loop through connection, the inputs have to be
terminated on 75 Ω .
SERVICE
CHANGE LANGUAGE
75 W TERMINATION
DIMMING
I2C DIAGNOSIS
MORE ...
75 W TERMINATION
RGB SOURCE 4 [ON]
RGB SOURCE 5 [ON]
Select with ê or é
then <ENTER>
<EXIT> to return.
Change Language
Highlight Language by pushing the control disk up or down and press
ENTER to select the Language Selection menu.
For the moment, only English is available.
SERVICE
CHANGE LANGUAGE
75 Ω TERMINATION
DIMMING
I2C DIAGNOSIS
MORE ...
CHANGE LANGUAGE
ENGLISH
Select with ê or é
then <ENTER>
<EXIT> to return.
ENTER displays the Change Language menu.
EXIT returns to the adjustment selection menu.
75 W Termination
The RGB inputs (source 4 and source 5) can be terminated on 75 Ω .
Highlight '75 Ω Termination' by pushing the control disk up or down and
press ENTER to display the 75 Ω termination menu.
Select the corresponding input by pushing the control disk up or down
and press ENTER to toggle between [ON] or [OFF].
Note : when there is no loop through connection, the inputs have to be
terminated on 75 Ω .
SERVICE
CHANGE LANGUAGE
75 W TERMINATION
DIMMING
I2C DIAGNOSIS
MORE ...
75 W TERMINATION
RGB SOURCE 4 [ON]
RGB SOURCE 5 [ON]
Select with ê or é
then <ENTER>
<EXIT> to return.