Barco R9001070 - Manual (Page 95)

Service Mode
12-2 5975696 BARCODATA 2100 140798
Service Mode
12-2 5975696 BARCODATA 2100 140798
Starting Up the Service Mode
Push the control disk up or down to highlight Service and then press
ENTER.
Some items in the Service mode are password protected (when the
password function is active). Enter your password to continue. All
other password protected items are now also free available if you
stay in the adjustment mode.
The service menu is built-up in two parts which are connected
together with the 'more' item.
If the disered item is not in the list of the displayed menu, select more
with the control disk and push ENTER to display the other items in the
service menu.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
PRESET INPUT BALANCE
MORE ...
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE
CHANGE LANGUAGE
75 Ω TERMINATION
DIMMING
I2C DIAGNOSIS
MORE ...
ENTER continues to the Service mode selection menu.
EXIT returns to operational mode.
Starting Up the Service Mode
Push the control disk up or down to highlight Service and then press
ENTER.
Some items in the Service mode are password protected (when the
password function is active). Enter your password to continue. All
other password protected items are now also free available if you
stay in the adjustment mode.
The service menu is built-up in two parts which are connected
together with the 'more' item.
If the disered item is not in the list of the displayed menu, select more
with the control disk and push ENTER to display the other items in the
service menu.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
PRESET INPUT BALANCE
MORE ...
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE
CHANGE LANGUAGE
75 Ω TERMINATION
DIMMING
I2C DIAGNOSIS
MORE ...
ENTER continues to the Service mode selection menu.
EXIT returns to operational mode.
Remark: The item 'LAMP DRIVE MODE' in this menu can be replaced
by 'DIMMING' depending on the used lamp.
LAMP DRIVE MODE for the lamp with order number R9829600
DIMMING for lamps with order number R9829510 and R9829740.
Remark: The item 'LAMP DRIVE MODE' in this menu can be replaced
by 'DIMMING' depending on the used lamp.
LAMP DRIVE MODE for the lamp with order number R9829600
DIMMING for lamps with order number R9829510 and R9829740.