Appendix e : source number 90 - 99, Source numbers 90 - 99 – Barco R9001070 User Manual

Page 118

Advertising

Appendix E : Source Number 90 - 99

5975696 BARCODATA 2100 140798

E-1

Appendix E : Source Number 90 - 99

5975696 BARCODATA 2100 140798

E-1

Source Numbers 90 - 99

These source numbers do not correspond to physical inputs. They can only be used when

the projector is equipped with a RCVDS 800 or RCVDS 05 or VS05. An additional adjustment

file can be created for these source numbers. This file can contain different settings. The

relationship between sources 0 - 9 and 90 - 99 is shown in the diagram below.

source input 1

source number 1

source number 91

file A

file A'

source input 2

source number 2

source number 92

file B

file B'

source input 3

source number 3

source number 93

file C

file C'

source input 9

source number 9

source number 99

file I

file I'

Follow the steps below to create a second file for sources 0 to 9 :

1. Select the source between 0 and 9.

2. Select the corresponding source number between 90 and 99 with the digit keys on the

RCU.

3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.

4. Save the file and exit the adjustment mode.

○○

Source numbers 90 - 99