Barco R9001070 - Manual (Page 91)

Installation
11-2
Installation
11-2 5975696 BARCODATA 2100 140798
5975696 BARCODATA 2100 140798
Starting Up the Installation Mode
Push the control disk up or down to highlight Installation and then
press ENTER.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
CONFIGURATION
INTERNAL PATTERNS
Select with é or ê
then <ENTER>
<EXIT> to return.
ENTER continues to the Installation mode selection menu.
EXIT returns to operational mode.
The following item can be selected in the Installation mode :
Configuration : to set up the projector position.
Internal Patterns :
- outline
- color bars
- multiburst
- checker board
- purity
Starting Up the Installation Mode
Push the control disk up or down to highlight Installation and then
press ENTER.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
CONFIGURATION
INTERNAL PATTERNS
Select with é or ê
then <ENTER>
<EXIT> to return.
ENTER continues to the Installation mode selection menu.
EXIT returns to operational mode.
The following item can be selected in the Installation mode :
Configuration : to set up the projector position.
Internal Patterns :
- outline
- color bars
- multiburst
- checker board
- purity