Barco R9001070 - Manual (Page 56)

Controlling
8-2
Controlling
8-2 5975696 BARCODATA 2100 140798
5975696 BARCODATA 2100 140798
The BARCODATA 2100 can be controlled with
a. the RCU
b. the hardwired RCU (cable is not included)
c. the local keypad.
Controlling the projector with the RCU and the hardwired RCU is equal.
How to Use the RCU?
a) Point the front of the RCU to the reflective screen surface.
b) RCU used in a hardwired configuration.
Plug one end of the remote cable in the connector on the bottom of
the RCU and the second side in the connector in the front panel of
the BARCODATA 2100 labelled 'CTRL'.
Cable not included
0 I
Ceiling
Screen
IR sensor
RCU
The BARCODATA 2100 can be controlled with
a. the RCU
b. the hardwired RCU (cable is not included)
c. the local keypad.
Controlling the projector with the RCU and the hardwired RCU is equal.
How to Use the RCU?
a) Point the front of the RCU to the reflective screen surface.
b) RCU used in a hardwired configuration.
Plug one end of the remote cable in the connector on the bottom of
the RCU and the second side in the connector in the front panel of
the BARCODATA 2100 labelled 'CTRL'.
Cable not included
0 I
Ceiling
Screen
IR sensor
RCU