Barco R9001070 - Manual (Page 51)

Connections
Connections
5975696 BARCODATA 2100 140798 7-7
7-7 5975696 BARCODATA 2100 140798
All input signals can be 75 ohm terminated via soft switches (see also
Service mode).
Connect the possible audio input signals for source 4 to the AUDIO
B input when the audio lock is OFF and for source 5 to the AUDIO C
input when the audio lock is OFF (see also chapter "Controlling")
RGB Input Selection :
For source 4, press digit button 4 on the RCU.
For source 5, press digit button 5 on the RCU.
If the sync input is a composite video signal, select the inputs as
follows :
For source 4, press digit button 8 on the RCU.
For source 5, press digit button 9 on the RCU.
All input signals can be 75 ohm terminated via soft switches (see also
Service mode).
Connect the possible audio input signals for source 4 to the AUDIO
B input when the audio lock is OFF and for source 5 to the AUDIO C
input when the audio lock is OFF (see also chapter "Controlling")
RGB Input Selection :
For source 4, press digit button 4 on the RCU.
For source 5, press digit button 5 on the RCU.
If the sync input is a composite video signal, select the inputs as
follows :
For source 4, press digit button 8 on the RCU.
For source 5, press digit button 9 on the RCU.