Barco R9001070 - Manual (Page 69)

Random Access Adjustment Mode
Random Access Adjustment Mode
5975696 BARCODATA 2100 140798 10-6
10-6 5975696 BARCODATA 2100 140798
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed. Push the control disk key
up or down to select an item. The color of the selected item will change
and follow one of the three methods to change the value.
a. press ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press ENTER to activate the digits. Push the control disk key to the
right or to the left to select the changing digit. Push the control disk
key up or down to scroll to desired digit. When finished press
ENTER to confirm.
c. counting up or down by pushing the control disk key to the right
or to the left.
To have a better view during an adjustment of the 'active' file, select
"Horizontal" or "Vertical" by pushing the control disk up or down and
press ENTER.
A full image is displayed with the settings on the left side.
To change the values, highlight (color change) first the changing
value by pushing the control disk up or down and continue by pushing
the control disk to the left or to right to count up or down.
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed. Push the control disk key
up or down to select an item. The color of the selected item will change
and follow one of the three methods to change the value.
a. press ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press ENTER to activate the digits. Push the control disk key to the
right or to the left to select the changing digit. Push the control disk
key up or down to scroll to desired digit. When finished press
ENTER to confirm.
c. counting up or down by pushing the control disk key to the right
or to the left.
To have a better view during an adjustment of the 'active' file, select
"Horizontal" or "Vertical" by pushing the control disk up or down and
press ENTER.
A full image is displayed with the settings on the left side.
To change the values, highlight (color change) first the changing
value by pushing the control disk up or down and continue by pushing
the control disk to the left or to right to count up or down.