Barco R9001070 - Manual (Page 30)

Installation Guidelines
3-6 5975696 BARCODATA 2100 140798
Installation Guidelines
5975696 BARCODATA 2100 140798 3-6
ice technician.
* How to Install a Projection Lens?
The BARCODATA 2100 is supplied without any lens.
The following lens is available :
SD(1.2:1) - Video
SD(1.2:1)
SD(1.7:1)
How to install the lens on the BARCODATA 2100?
Remove the foam rubber in the opening of the lens holder.
- Take the new lens out of its shipping carton and remove the lens
covers.
- Turn the lens into the lens holder by turning clockwise.
- Focus the lens (see appendix C) and secure the correct position
with the fastener ring by turning this ring clockwise.
* How to Install the Projector?
Ceiling mount or table mount?
To install the BARCODATA 2100, it is recommended that the BARCO
mounting kits which are specially designed for this function be used
at all times.
BARCO ceiling support CM50.
CM50 with pulley system, Order number : R9827990.
CM50 without pulley system, Order number : R9827991.
Note : The CM50 in combination with the adapter plate can
only be used for 70 % OFF-AXIS projection.
Table mounting of the BARCODATA 2100
(100% off-axis projection)
To install the projector
100 % off-axis, con-
sult a qualified serv-
Screen
PD
B
Floor
Projector
CD
A
CD = B - A
CD = height of table + supporting feet
SH
SH
SW
SIDE VIEW
BACK VIEW
Screen
BOTTOM VIEW
SW
Floor
ice technician.
* How to Install a Projection Lens?
The BARCODATA 2100 is supplied without any lens.
The following lens is available :
SD(1.2:1) - Video
SD(1.2:1)
SD(1.7:1)
How to install the lens on the BARCODATA 2100?
Remove the foam rubber in the opening of the lens holder.
- Take the new lens out of its shipping carton and remove the lens
covers.
- Turn the lens into the lens holder by turning clockwise.
- Focus the lens (see appendix C) and secure the correct position
with the fastener ring by turning this ring clockwise.
* How to Install the Projector?
Ceiling mount or table mount?
To install the BARCODATA 2100, it is recommended that the BARCO
mounting kits which are specially designed for this function be used
at all times.
BARCO ceiling support CM50.
CM50 with pulley system, Order number : R9827990.
CM50 without pulley system, Order number : R9827991.
Note : The CM50 in combination with the adapter plate can
only be used for 70 % OFF-AXIS projection.
Table mounting of the BARCODATA 2100
(100% off-axis projection)
To install the projector
100 % off-axis, con-
sult a qualified serv-
Screen
PD
B
Floor
Projector
CD
A
CD = B - A
CD = height of table + supporting feet
SH
SH
SW
SIDE VIEW
BACK VIEW
Screen
BOTTOM VIEW
SW
Floor