Barco R9001070 - Manual (Page 59)

Controlling
Controlling
5975696 BARCODATA 2100 140798 8-5
8-5 5975696 BARCODATA 2100 140798
Contrast Control
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting
conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color Saturation
Color saturation is only active for Video and S-Video. Adjust the color
intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43
or NTSC 3.58 system.
Use the + button
Use the - button.
Sharpness Control.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use the Phase key to adjust the phase. Within the total adjustment
range there are 2 or 3 areas where the phase is correctly aligned.
Sound Controls with Direct Access.
When a sound control is pressed, a text box with a bar scale, icon
and function name of the control, e.g. 'volume...' appears on the
screen (only if text is ON). See example screen. The length of the
bar scale indicates the current memorized setting for this source. The
bar scale changes as the + or - buttons of the control are pressed.
The picture controls can only be adjusted with the RCU.
VOLUME
0 100 50
Contrast Control
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting
conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color Saturation
Color saturation is only active for Video and S-Video. Adjust the color
intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43
or NTSC 3.58 system.
Use the + button
Use the - button.
Sharpness Control.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use the Phase key to adjust the phase. Within the total adjustment
range there are 2 or 3 areas where the phase is correctly aligned.
Sound Controls with Direct Access.
When a sound control is pressed, a text box with a bar scale, icon
and function name of the control, e.g. 'volume...' appears on the
screen (only if text is ON). See example screen. The length of the
bar scale indicates the current memorized setting for this source. The
bar scale changes as the + or - buttons of the control are pressed.
The picture controls can only be adjusted with the RCU.
VOLUME
0 100 50