Rockwell Automation 160 160SSC CopyCat Keypad - Manual (Page 15)

How to Program the Drive 2-3
4. Press the Enter key to save the new value to the drive.
Or
Press the Escape key to cancel the change.
Method 2 – Enter Parameter Value
1. Select a Program Group parameter to edit.
2. Press the Select key.
The cursor will blink at the first digit of the parameter value to indicate that the
value can be changed.
3. Enter the new parameter value using the decimal point and numeric keys.
Use the Delete key to erase incorrectly entered digits.
4. Press the Enter key to save the new value to the drive.
Or
Press the Escape key to cancel the change.
If a value is incorrectly formatted or is out of range, one of the following messages
is displayed:
Press the Escape key or Enter key to return to the selected parameter.
Perform Steps 2 – 4 to enter a new parameter value.