Rockwell Automation 160 160SSC CopyCat Keypad - Manual (Page 18)

2-6 How to Program the Drive
Stop a Load FROM Drive
1. Press the Escape key to stop a load operation.
2. Press the Enter key to stop loading.
Or
Press the Escape key to continue loading.
An incomplete load operation will result in an empty drive configuration file.
3. Press the Escape key or Enter key to return to the Load Menu.
Load a Drive Configuration File TO Drive
The Load Menu TO Drive option is used to load a drive configuration file from the
CopyCat Keypad module to a drive.
Important: If the drive contains parameter values that have been modified from
factory defaults, you may want to create a backup drive
configuration file using the Load Menu FROM Drive option prior
to performing a Load To Drive operation.
1. Press the Escape key until the Load LED lights.
In Load mode, the Load Menu is displayed.
There are three Load Menu options:
• TO Drive
• FROM Drive
• DEFINE Names
2. Press the Up or Down arrow key to display the Load Menu TO Drive option.
3. Press the Enter key to select the option.
“Load TO Drive” and the last drive configuration file viewed in the directory is
displayed. For example: