Rockwell Automation 160 160SSC CopyCat Keypad - Manual (Page 22)

2-10 How to Program the Drive
6. Press the Up or Down arrow key to change the character.
Press and hold the Up or Down arrow key to scroll through the ASCII
character set. If the end or beginning of the character set is reached, release the
Up or Down arrow key and press and hold again to continue scrolling from the
opposite end.
7. Press the Enter key to save the new character.
The cursor moves one position to the right.
8. Repeat Steps 5 and 6 to change the remaining characters.
9. When finished, press the Escape key or Enter key to return to the Load Menu.