Rockwell Automation 160 160SSC CopyCat Keypad - Manual (Page 16)

2-4 How to Program the Drive
Load a Drive Configuration File FROM Drive
Up to 15 drive configuration files can be saved to the CopyCat Keypad file directory.
The CopyCat Keypad must be in Load mode in order to load to drive, load from
drive, or name drive configuration files.
The Load Menu FROM Drive option copies the parameter values stored in the drive
to a drive configuration file stored in the CopyCat Keypad.
1. Press the Escape key until the Load LED lights.
In Load mode, the Load Menu is displayed.
There are three Load Menu options:
• TO Drive
• FROM Drive
• DEFINE Names
2. Press the Up or Down arrow key to display the Load Menu FROM Drive
option.
3. Press the Enter key to select the option.
“Load FROM Drive” and the last drive configuration file viewed in the
directory is displayed. For example:
The last two characters of the configuration file name identify the drive model.
“SF” = Analog Signal Follower and “PS” = Preset Speed.
4. Select the drive configuration file to which you want to save the drive settings.
Use the Up or Down arrow key to scroll through the file directory.
Or
Directly enter a file number between 1 and 15 and press the Enter key.