Rockwell Automation 160 160SSC CopyCat Keypad - Manual (Page 17)

How to Program the Drive 2-5
5. Press the Enter key.
If the selected file is empty, following message is displayed.
If the selected file is not empty, the following prompt is displayed:
6. Press the Enter key to load the drive settings to an empty file or to overwrite an
existing file.
Or
Press the Escape key to cancel the Load FROM Drive command.
Important: Overwriting an existing drive configuration file does not change
its name.
7. Press the Enter key to confirm that you have selected the correct file.
The progress of the load operation is displayed.
Successful completion of the load operation is displayed.
8. Press the Escape key or Enter key to return to the Load Menu.