Rockwell Automation 150 MNL/SMC DIALOG+/APP-PROD GUIDE - Manual (Page 60)

SMC Dialog Plus Smart Motor Controller 3-23
Pump Control Option
The SMC Dialog Plus controller’s unique interactive Pump Control is
designed to reduce fluid surges in pumping systems. It provides
closed loop acceleration and deceleration control of centrifugal pump
motors without the need for feedback devices.
Figure 3.19 Pump Control Option
Pump Start Run Pump Stop
Motor
Speed
100
Time (seconds)
!
ATTENTION: Pump Stop is not intended to be used
as an emergency stop. Refer to the applicable standards
for emergency stop requirements.