Rockwell Automation 1400-SP PowerMonitor Software - Manual (Page 3)

A–B
Preface
i
Using This Manual
Review the table below to familiarize yourself with the topics contained in
this manual.
For information about: Refer to chapter:
System Components and features 1
System and Computer Requirements 2
Version of DOS Required
RS–232C vs RS–485 communications
Connection to Remote Sites Via Telephone Lines/Modems
Installation of the Communication Hardware 3
Connection To Single/Multiple Powermonitors
Modem Configuration Information
Installation of the System Software
Using the Software 4
Powermonitor Data Display and Configuration 5
Manual Control of Powermonitor Internal Relays 6
Printing Log Disk Files 7
Troubleshooting information 8
Warranty information 9
Catalog Number Explanation Appendix A
Communications Application Note Appendix B
Setpoint parameter form Appendix C
Keyboard Reference Appendix D
Loading Event, MIN/MAX, or Snapshot Log Files into Lotus Appendix E
For this information: Refer to:
Catalog Number 1400–PD Installation and Operation Manual Publication 1400–800
Installing the Communications Card Instructions
Catalog Number 1400–DCU Publication
1400–5.0
RS–232C and RS–485 Convertor Instructions
Catalog Number 1400–CC Publication
1400–5.1
Catalog Number 6190–PMO ControlView Software A–B Highland Heights
What This Manual Contains
For More Information