Rockwell Automation 1400-SP PowerMonitor Software - Manual (Page 55)

Chapter 5
Powermonitor Data Display and Configuration
5–17
Save And Exit
The Powermonitor will be reconfigured using the new values entered into the
screen when the operator presses the <Esc> key to return to the MAIN
MENU.
There are three CLEAR functions supported by the Powermonitor Software
for the Powermonitor. These include CLEAR HOURS, CLEAR S1
COUNTER, and CLEAR MIN/MAX.
The CLEAR HOURS option encompasses, CLEAR kWH, CLEAR kVAH
and CLEAR kVARH for the Powermonitor (see Figure 5.13).
Figure 5.13
Clear Hours Screen
The CLEAR kWH, CLEAR kVAH and CLEAR kVARH options are used to
clear the kWH, kVAH, and kVARH totals of each meter. The CLEAR
MIN/MAX function clears the device’s Min/Max Log. The CLEAR S1
COUNTER function resets the S1 counter total of the Powermonitor to zero.
To invoke any CLEAR function, return to the MAIN MENU by pressing the
<Esc> key, place the cursor onto the desired CLEAR option and press the
<Enter> key. The appropriate CLEAR screen will be displayed.
Clear Functions