Rockwell Automation 1746-XXXX SLC 500 4-Channel Analog I/O Modules User Manual - Manual (Page 106)

Publication 1746-UM005B-EN-P - June 2004
C-6 Optional Analog Input Software Calibration
| | +MUL--------------------+ | |
| +-+MULTIPLY +-+ |
| | |Source A LO_VALUE| | |
| | | 3267| | |
| | |Source B SLOPE_X10K| | |
| | | 9983| | |
| | |Dest N10:5| | |
| | | 32767| | |
| | +-----------------------+ | |
| | +DDV---------------+ | |
| +-+DOUBLE DIVIDE +------+ |
| | |Source 10000| | |
| | | | | |
| | |Dest N10:6| | |
| | | 3261| | |
| | +------------------+ | |
| | +SUB---------------+ | |
| +-+SUBTRACT +------+ |
| | |Source A SCALE_LO| | |
| | | 3277| | |
| | |Source B N10:6| | |
| | | 3261| | |
| | |Dest OFFSET| | |
| | | 16| | |
| | +------------------+ | |
| | S:5 | |
| +--(U)----------------------+ |
| 0 |
Rung 2:3
| Conversion |
| Enable |
| N10:0 +MUL--------------------+ |
|----] [-----------------------------------------+-+MULTIPLY +-+-|
| 3 | |Source A ANALOG_IN| | |
| | | 8000| | |
| | |Source B SLOPE_X10K| | |
| | | 9983| | |
| | |Dest N10:8| | |
| | | 0| | |
| | +-----------------------+ | |
| | S:5 | |
| +--(U)----------------------+ |
| | 0 | |
| | +DDV---------------+ | |
| +-+DOUBLE DIVIDE +------+ |
| | |Source 10000| | |
| | | | | |
| | |Dest N10:12| | |
| | | 0| | |
| | +------------------+ | |
| |
| | +ADD---------------+ | |
| +-+ADD +------+ |
| |Source A N10:12| |
| | 0| |
| |Source B OFFSET| |
| | 16| |
| |Dest ANALOG_SCL| |
| | 8002| |
| +------------------+ |
Rung 2:4
| |
|-------------------------------------+END+------------------------------------|