Ec declaration of conformity – Rockwell Automation 2099-BMxx-S Kinetix Safe Torque-off Feature Safety Reference Manual User Manual
Page 47
Rockwell Automation Publication GMC-RM002F-EN-P - June 2013
47
EC Certifications Appendix C
Figure 33 - Kinetix 7000 Servo Drives EC DoC
Document Control Number:
IMC-0018-H-EN
1 / 4
EC Declaration of Conformity
The undersigned, representing the manufacturer
and the authorised representative established within the
Community
Rockwell Automation, Inc.
6400 W. Enterprise Drive
Mequon, Wisconsin 53092 – USA
Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
herewith declare that the Products
Digital Servo Drive and accessories Kinetix 7000
Product identification (brand and
catalogue number/part number):
Allen-Bradley Bulletin 2099
(reference the attached list of catalogue numbers)
Product Safety Function:
Safe Torque Off
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with
the installation instructions contained in the product documentation:
2006/95/EC
Low Voltage Directive
2004/108/EC EMC
Directive
2006/42/EC
Machinery Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 60034-1:2004
Rotating electrical machines – Part 1: Rating and performance
EN 60204-1:2006
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
EN 61800-3:2004
Adjustable speed electrical power drive systems – Part 3: EMC requirements
and specific test methods
EN 50178:1997
Electronic equipment for use in power installations
IEC 61508 Part 1-7:2000
Functional safety of electrical/electronic/programmable electronic safety-
related systems
EN ISO 13849-1:2008
Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
Year of CE Marking
2006
Manufacturer:
Authorised Representative in the Community:
Signature
Signature
Name:
Tom Van Groll
Name:
Viktor Schiffer
Position:
Director Engineering
Position:
Engineering Manager
Date:
16-Dec-2010
Date:
17-Dec-2010