Rockwell Automation 1440-ACNR XM ControlNet Adapter User Manual

Page 10

Advertising
background image

10

Publication ICM-UM001C-EN-E - March 2013

Chapter 2

Install the Adapter

ATTENTION

Environment and Enclosure

This equipment is intended for use in a Pollution Degree 2

industrial environment, in overvoltage Category II applications

(as defined in IEC 60664-1), at altitudes up to 2000 m (6562 ft)

without derating.
This equipment is not intended for use in residential

environments and may not provide adequate protection to radio

communication services in such environments.
This equipment is supplied as open-type equipment. It must be

mounted within an enclosure that is suitably designed for those

specific environmental conditions that will be present and

appropriately designed to prevent personal injury resulting from

accessibility to live parts. The enclosure must have suitable

flame-retardant properties to prevent or minimize the spread of

flame, complying with a flame spread rating of 5VA or be

approved for the application if nonmetallic. The interior of the

enclosure must be accessible only by the use of a tool.

Subsequent sections of this publication may contain additional

information regarding specific enclosure type ratings that are

required to comply with certain product safety certifications.
In addition to this publication, see the following:

Industrial Automation Wiring and Grounding Guidelines,

publication

1770-4.1

, for additional installation

requirements.

NEMA Standard 250 and IEC 60529, as applicable, for

explanations of the degrees of protection provided by

enclosures.

ATTENTION

Prevent Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which

can cause internal damage and affect normal operation. Follow

these guidelines when you handle this equipment:

Touch a grounded object to discharge potential static.

Wear an approved grounding wrist strap.

Do not touch connectors or pins on component boards.

Do not touch circuit components inside the equipment.

Use a static-safe workstation, if available.

Store the equipment in appropriate static-safe packaging

when not in use.

Advertising