Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 30)

30 Publication ICM-UM001C-EN-E - March 2013
Chapter 3 Configure the Adapter
2. Click the plus sign next to the Specialty folder to display a list of XM
modules.
3. Select the 1440-DYN02-01RJ module and click OK.
TIP
If you do not see the module in the list, you may need to
obtain the AOP from the Rockwell Automation support
website.
1. Go to http://www.rockwellautomation.com/support/ .
2. Click Downloads/RSLogix 5000 I/O Modules Add-on
Profiles.
3. Select the 1440-DYN02-01RJ XM Dynamic Vibration
Measurement Module Add-on Profile.