Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 25)

Publication ICM-UM001C-EN-E - March 2013 25
Configure the Adapter Chapter 3
The New Module dialog box opens.
5. Enter the following information.
6. The Module Properties dialog box opens when Open Module
Properties is checked. Clear the Open Module Properties check box if
you do not need to further configure the module.
7. Click OK to accept the configuration.
The ControlNet Bridge is added to the I/O Configuration.
On this tab In this field Enter
General Name Enter a unique name for the module.
Node Address Enter the node address of the module.
Slot Enter the slot of the bridge in the rack.
Revision Select the major and minor revision level.
Electronic Keying Choose the appropriate electronic keying method.