Download the program to the controller – Rockwell Automation 1440-ACNR XM ControlNet Adapter User Manual
Page 32
32
Publication ICM-UM001C-EN-E - March 2013
Chapter 3
Configure the Adapter
The 1440-DYN02-01RJ module is added to the I/O Configuration.
Refer to the XM Dynamic Measurement Module User Manual,
publication
ICM-UM002
, or online help for information on configuring
the module.
Download the Program to
the Controller
After adding the adapter and the XM module to the I/O configuration, you
must download the configuration to the controller. You should also save the
configuration to a file on your computer.
1. From the Communications menu, choose Who Active.
The Who Active dialog box opens.
2. Select the controller to which you need to download a project and click
Set Project Path to establish the path.
3. Click Download to download the configuration to the controller.