Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 35)

Publication ICM-UM001C-EN-E - March 2013 35
Configure the Adapter Chapter 3
6. Click OK.
7. As the selected ControlNet path is browsed, RSNetWorx for
ControlNet software creates a graphical representation of the devices on
the network.
8. Click the Edits Enabled check box or choose Enable Edits from the
Network menu.
If there is a different I/O configuration than the configuration now
being saved, the Online / Offline mismatch dialog box will open.
Click OK to close the dialog box.