Add modules to the i/o configuration, Select a controller – Rockwell Automation 1440-ACNR XM ControlNet Adapter User Manual
Page 22
Advertising
22
Publication ICM-UM001C-EN-E - March 2013
Chapter 3
Configure the Adapter
Add Modules to the I/O
Configuration
To establish communication between the controller and adapter over the
network, you must add the ControlLogix controller and its bridge to the I/O
Configuration.
Select a Controller
1. Start RSLinx software.
2. Start RSLogix 5000 Enterprise series software, version 16 or later.
3. From the File menu, choose New.
The New Controller dialog box opens.
Advertising