Rockwell Automation 1440-ACNR XM ControlNet Adapter User Manual
Page 27
Advertising
Publication ICM-UM001C-EN-E - March 2013
27
Configure the Adapter Chapter 3
2. Click the plus sign next to the Communications folder to display a list of
available communication modules.
3. Select the 1440-ACNR/A ControlNet adapter and click OK.
The New Module dialog box opens.
4. Enter the following information.
5. Click OK to accept the configuration.
On this tab
In this field
Enter
General
Name
Enter a unique name for the adapter.
Controller Node
Enter the node address of the adapter.
Comm Format
The Comm Format for the 1440-ACNR is None. The adapter
makes a direct connection to the XM module referenced by the
data.
Revision
Select the major and minor revision level.
Electronic Keying
Choose the appropriate electronic keying method.
Advertising