Metrohm 848 Titrino plus - Manual (Page 117)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Parameters
848 Titrino plus
￭￭￭￭￭￭￭￭ 107
7.3.7.2 Editing a calculation
Result name
The result name is the text which will be shown in the result view and in
the report.
Entry 12 characters
Default value empty
R1=…R5=
Shows the calculation formula. A special editor is opened for the defini-
tion (see Chapter 5.3, page 23).
Entry 44 characters
Default value empty
Decimal places
Number of decimal places used to display the result.
Input range 0 - 5
Default value 2
Result unit
The result unit is displayed and saved together with the result.
Selection % | mol/L | mmol/L | g/L | mg/L | mg/mL | ppm |
g | mg | mL | mg/piece | °C | µL | mL/min | User-
defined
Default value %
User-defined
A user-defined unit can be created. This will be added to the selection
list. The previous entry will be overwritten as soon as the new unit has
been defined. A blank entry can be generated this way as well.
Save as titer
The result can be saved as titer for this selected solution. If statistics has
been switched on, then the current mean value of the determination ser-
ies will be saved.
Selection on | off
Default value off
Save as CV
The calculated result can be saved as a method-independent variable, a
so-called common variable. The result is then also available in other meth-
ods for calculations. If statistics has been switched on, then the current
mean value of the determination series will be saved.