3 connecting a stirrer, Connecting a stirrer, Figure 6 – Metrohm 848 Titrino plus User Manual
Page 21: Connecting a polarizable electrode, Figure 7
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
848 Titrino plus
■■■■■■■■
11
Connecting a polarizable electrode
Figure 6
Connecting a polarizable electrode
Note
The electrode cable is protected against accidental disconnection of the
cable by means of a pull-out protection feature. If you wish to remove
the plug, then you must first retract the outer plug sleeve.
3.3
Connecting a stirrer
You can connect the following stirrers:
■
801 Stirrer
■
803 Ti Stand
■
804 Ti Stand (requires rod stirrer)
Figure 7
Connecting a stirrer
Caution
Make sure that the flat side of the plug matches the marking on the
socket.
Advertising