11 statistics – Metrohm 848 Titrino plus User Manual
Page 51
■■■■■■■■■■■■■■■■■■■■■■
5 Operation
848 Titrino plus
■■■■■■■■
41
Statistics
Display the statistical overview of a determination series (see Chapter
5.11, page 41).
Displaying the curve
The curve of the current determination can be displayed with the Curve
function.
The arrow keys [
⇦] and [⇨] can be used to move to the individual measur-
ing points. A cross hair is used to show the current position on the curve.
The data (volume, measured value, time, etc.) for the respective measur-
ing point is indicated on the right-hand side.
Recalculating
Note
Recalculation cannot be undone.
All of the results are recalculated with the Recalculate function. This is
necessary if, for example, the calculation, the titer or the sample size has
been modified.
5.11
Statistics
Menu
▶ Results ▶ Statistics
The statistical overview of a determination series can be displayed in the
Results dialog with the Statistics function.
Note
This function is visible only if statistics has been activated.