2 saving a method, Saving a method – Metrohm 848 Titrino plus User Manual
Page 36
5.4 Methods
■■■■■■■■■■■■■■■■■■■■■■
26
■■■■■■■■
848 Titrino plus
2 Select a titration and measuring mode
■
In the function bar, select New and press [OK].
■
Select Mode and press [OK].
■
Select the desired titration mode in the selection list and apply
with [OK].
■
Select Measured quantity and press [OK].
■
Select the desired measuring mode in the selection list and apply
with [OK].
■
Press [BACK].
The method is now loaded and is displayed in the main dialog under
Method.
If a new method has been created, then the individual parameters can be
modified under Menu
▶ Parameters.
5.4.2
Saving a method
If you modify method parameters, then you can save these as your own
method. A maximum of 100 methods can be saved.
To save a method, proceed as follows:
1 Opening the method table
■
In the main dialog, select Method and press [OK].
The method table opens: