5 operation, 1 switching the instrument on and off, Switching the instrument on and off – Metrohm 848 Titrino plus User Manual
Page 29
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Operation
848 Titrino plus
■■■■■■■■
19
5 Operation
5.1
Switching the instrument on and off
Switching on the instrument
Proceed as follows:
1
■
Press the red [STOP] key.
The instrument is initialized and a system test performed. This
process takes some time.
■
If a buret unit has been attached, then a request appears to carry
out the PREP function:
All tubings and the cylinder are rinsed with the PREP (Preparing)
function. The preparing of the buret unit is described in chapter
"Preparing the buret unit (PREP)", page 45.
■
Confirm the message with [OK].
The display of this message can be deactivated in the system set-
tings (see "PREP warning", page 54).
The main dialog is displayed:
Advertising