Metrohm 848 Titrino plus - Manual (Page 74)

6.6 Configuring external devices
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
64 ￭￭￭￭￭￭￭￭
848 Titrino plus
Graphics width
Adjust the width of the curve to be printed out to the paper width of the
printer to be used. The default value depends on the selected printer. The
height of the curve is 2/3 of the width.
Input range 100 - 3000 Pixels
Keyboard layout
A commercially available USB keyboard can be connected to make it eas-
ier to enter text and numbers. Specify the country-specific keyboard lay-
out.
Selection English US | French FR | German CH | German
DE | Spanish ES
Default value English US
Balance
If you have connected a balance, then you must define the balance type
here.
Selection AND | Mettler | Mettler AT | Mettler AX |
Ohaus | Precisa | Sartorius | Shimadzu
Default value Sartorius
The following table indicates the balance type that needs to be selected
for the balance model:
Balance Balance type
AND AND
Mettler AB, AE, AG, AM,
AJ, PE, PM, PJ, PR, XP, XS Mettler
Mettler AT Mettler AT
Mettler AX, MX, UMX, PG,
AB-S, PB-S Mettler AX
Ohaus Voyager, Explorer,
Analytical Plus Ohaus
Precisa Precisa
Sartorius Sartorius
Shimadzu BX, BW Shimadzu
Editing the COM1 settings
Menu
▶ System ▶ External devices ▶ COM1 settings