Metrohm 855 Robotic Titrosampler - Manual (Page 12)

1.3 About the documentation ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 ￭￭￭￭￭￭￭￭ 855 Robotic Titrosampler
￭ Controller connection
For connecting a PC or Touch Control.
￭ Two USB connectors
For connecting a printer, barcode reader or other control devices
(Titrando, Dosing Interface etc.).
￭ Three MSB connectors (Metrohm Serial Bus)
For connecting dosing devices (Dosimat with exchange unit or Dosino
with dosing unit), stirrers or Remote Boxes.
1.2.3 Intended use
The 855 Robotic Titrosampler is designed for usage as an automation system
in analytical laboratories. It is not suitable for usage in biochemical, biolog-
ical or medical environments in its basic equipment version.
The present instrument is suitable for processing chemicals and flammable
samples. The usage of the 855 Robotic Titrosampler therefore requires that
the user has basic knowledge and experience in the handling of toxic and
caustic substances. Knowledge with respect to the application of the fire
prevention measures prescribed for laboratories is also mandatory.
1.3 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information and
warnings which the user must follow in order to ensure safe operation of
the instrument.
1.3.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Warning
This symbol draws attention to a possible life hazard
or risk of injury.