Metrohm 855 Robotic Titrosampler - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
855 Robotic Titrosampler ￭￭￭￭￭￭￭￭ 7
1.4.4 Personnel safety
Warning
Wear protective goggles and working clothes suitable for laboratory work
while operating the 855 Robotic Titrosampler . It is also advisable to wear
gloves when caustic liquids are used or in situations where glass vessels
could break.
Warning
Always install the safety shield supplied with the equipment before using
the instrument for the first time. Pre-installed safety shields are not
allowed to be removed.
The 855 Robotic Titrosampler may not be operated without a safety
shield!
Warning
Personnel are not permitted to reach into the working area of the instru-
ment while operations are running!
A considerable risk of injury exists for the user.
Warning
In the event of a possible blockage of a drive, the mains plug must be
pulled out of the socket immediately. Do not attempt to free jammed
sample vessels or other parts while the device is switched on. Blockages
can only be cleared when the instrument is in a voltage-free status; this
action generally involves a considerable risk of injury.
Warning
The 855 Robotic Titrosampler is not suitable for utilization in biochemical,
biological or medical environments in its basic equipment version.
Appropriate protective measures must be implemented in the event that
potentially infectious samples or reagents are being processed.