10 equipping the titration head, Figure 18 – Metrohm 855 Robotic Titrosampler User Manual
Page 33
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
855 Robotic Titrosampler
■■■■■■■■
25
Caution
Take care to ensure when mounting tubing and cables that there is no
traction on the drives while moving the lift or swiveling the robotic arm.
This could lead to overloading of and possible damage to the drive.
Remove the clips of the two lowest chain links when you install the rinsing
and aspiration tubing.
3.10
Equipping the titration head
Mounting the aspiration and rinsing tubings
1
2
3
6.1805.060
6.1805.510
6.1543.170
Figure 18
Installing the rinsing tubings and the aspiration tip
Proceed as follows:
1 Connect the rinsing nozzles
■
Connect the three rinsing tubings that are already connected to the
Tower 2 distributor to the rinsing nozzles already mounted on the
titration head.