Metrohm 886 Prof.Thermostat/Reactor User Manual
Page 23
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210)
■■■■■■■■
15
1
2
3
1 Remove the two covering stoppers.
2 Loosen the two cylinder screws with the 3 mm hexagon key and
remove them.
3 Remove the bottle holder.
Stack other instruments in the required order. Mount the 6.2061.100 bot-
tle holder onto the topmost instrument (see "Mounting the bottle
holder", page 15).
Proceed as follows:
Mounting the bottle holder
Before you can mount the bottle holder, the following preconditions must
be met:
■
The instrument is switched off.
To mount the bottle holder, you need a 6.2621.100 hexagon key 3 mm.
Advertising