Metrohm 886 Prof.Thermostat/Reactor - Manual (Page 52)

9.7 Mains connection ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
44 ￭￭￭￭￭￭￭￭ 886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210)
9.7 Mains connection
Required voltage 100…240 V ± 10 % (auto-sensing)
Required fre-
quency 50…60 Hz ± 3 (auto-sensing)
Power consump-
tion 40 W input power (typical anion analysis)
15 W input power at standby (idle)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ internal fuse 3.15 A
9.8 Interfaces
USB
Input 1 USB Upstream, type B (connection to PC).
Output 2 USB Downstream, type A
MSB
Number 2 MSB MiniDin 8-pol female
for iDosino, Stirrers, Remote, etc.
column recogni-
tion for an intelligent reactor or an intelligent column
Leak sensor 1 jack plug
Further connec-
tions
Extension mod-
ule 1 DSUB 15-pin (female)
Analog Output
(optional) 1 DSUB 15-pin (female)
Service 1 DSUB 15-pin high density (female)