1 positioning a sample rack, Positioning a sample rack, Fig. 19 – Metrohm 824 Easy Sample Changer User Manual
Page 26: Attaching a sample rack
Advertising
2.8 Sample racks
20
824 Easy Sample Changer,
Installation
2.8.1 Positioning a sample rack
After a sample rack has been po-
sitioned the sample changer must be
initialized with <RESET> so that the
magnet code of the rack can be read
in. This makes the unambiguous re-
cognition of the rack possible and
therefore the correct positioning of the
beakers.
Fig. 19
Attaching a sample rack
Magnet holder
Magnet sensor
Advertising