4 interrupting a method run, 5 canceling a method run, Interrupting a method run – Metrohm 824 Easy Sample Changer User Manual
Page 32: Canceling a method run
Advertising
3.4 Automatic operation
26
824 Easy Sample Changer,
Operation
3.4.4 Interrupting a method run
HOLD
SELECT
Press the <HOLD> key to briefly interrupt a method run.
•
In the HOLD condition the status LED blinks more quickly.
•
The run can be continued from the same position by pressing the
<START> key.
3.4.5 Canceling a method run
STOP
RESET
A method run is canceled with the <STOP> key.
•
The sample changer switches back to the normal operating mode.
The status LED lights up permanently.
•
After the manual cancelation of a method the final sequence is not
carried out.
Advertising