Canon IMAGE RUNNER 5075 User Manual
Page 101
Settings Menu
3-33
3
Pr
inter Settings Menu
If [Auto] is selected, the gutter margins are automatically adjusted based on the
number of pages and paper thickness.
If [Correction Width] is selected, the gutter widths are adjusted based on a value
you enter which specifies the difference in how far the edge of the most inner
page and the edge of the most outer page come when sheets of paper are folded
in half to make the booklet.
NOTE
This function is not available if 'Booklet' is set to [Off].
Pressing [
] increase the setting value by 0.001" (0.05 mm) each time the key is
pressed. Pressing [
] decreases the setting value by 0.001" (0.05 mm) each
time. Holding down either [
] or [
] continuously speeds up the value
alteration.
If this setting is used in combination with the 'Offset Short Edge/Offset Long Edge'
or 'Margin', the values of these three settings are added together.