Settings menu, Copies, Sided printing – Canon IMAGE RUNNER 5075 User Manual
Page 77: Settings menu -9, Copies -9 2-sided printing -9, Settings menu" and
Settings Menu
3-9
3
Pr
inter Settings Menu
Settings Menu
An asterisk (*) indicates the default setting in this section.
Copies
1 to 9999; 1
*
This setting enables you to specify the number of copies printed. The default
setting is '1', but you can specify up to 9999 copies.
2-Sided Printing
On, Off
*
This parameter enables you to select one-sided or two-sided printing. When
'2-Sided Printing' is specified, the document is printed on both sides of the paper.
NOTE
Two-sided printing can use either the paper drawer or the stack bypass with the
following sizes.
- 11" x 17", LGL, LTR, LTRR, STMTR, A3, JIS-B4, A4, A4R, JIS-B5, JIS-B5R, and
A5R
Two-sided printing can use paper within the following range:
- 17 lb bond to 110 lb index (64 to 200 g/m
2
)
When printing on letterhead paper, or paper with a logo (such as a cover sheet),
please note the following:
- If the paper is fed from a paper drawer, the printing surface should be face down.
- If the paper is fed from the stack bypass or the optional paper deck, the printing
surface should be face up.