Canon IMAGE RUNNER 5075 User Manual
Page 105
Settings Menu
3-37
3
Pr
inter Settings Menu
NOTE
This menu is only displayed for selection when the Saddle Finisher-AD2 and the
Document Insertion/Folding Unit-F1 are attached.
C-folded paper might be wrinkled depending on the type of paper and the
operating environment.
You cannot use this function in combination with the following functions or
operations.
- Booklet
- Saddle Stitch
- Transparency Interleaving
- [Rotate+Collate], [Rotate+Group], [Staple+Collate], or [Staple+Group] during
Finishing
- Punch
- Creep Correction
- Cover, Sheet Insertion, Job Separator, Tab Paper
You can select C-Fold for the following paper sizes and types.
- Paper sizes: Letter-R, A4R
- Paper types: Plain Paper, Recycled Paper, Color Paper
The maximum number of sheets that can be output to the paper trays is 40.
Under normal conditions, the print surface when C-Folding is the front, however, by
selecting [Face Up] in 'Face Up/Down', you can C-Fold with the print surface on the
back (inside). When performing two-sided printing, the paper is C-Folded with both
the front and back sides printed.
You can adjust the width to fold paper with [C-Fold Placement Adjustment] in
Adjustment/Cleaning settings (from the Additional Functions screen). You should
specify a value for this setting to adjust the folding width of C-folded paper to match
the size needed to fit in an envelope, or to adjust the positioning of an image on
C-folded paper to be visible through a window envelope. For details on this setting,
see the Reference Guide.