Canon IMAGE RUNNER 5075 - Manual (Page 120)

PS Settings 3-52
3
Pr
inter Settings Menu
PS Settings
NOTE
These settings are applicable only when printing in the PS mode.
Job Timeout
0 to 3600 seconds; 0 * seconds
This setting enables you to specify the amount of time before a job times out. If a
job has not finished within the set time limit, the job automatically cancels.
Wait Timeout
0 to 3600 seconds; 300 * seconds
This setting enables you to specify the amount of time the machine will wait for
data sent from the host computer before it times out. If data is not received within
the set time limit, the job automatically cancels.
Print PS Errors
On, Off *
This setting determines whether an error page is printed when an error is
encountered.