Canon IMAGE RUNNER 5075 - Manual (Page 111)

Settings Menu 3-43
3
Pr
inter Settings Menu
Mode Priority
None * , PS, PCL, and PDF1.5
This setting determines which personality should be used if a job is received
without a specified command language or Direct Print data. 'Mode Priority' is used
when the 'Personality' is set to [Auto].
None
This does not specify a preferred personality. If a job is received without a
specified command language or Direct Print data, the current personality is used.
The default setting is [None].
PS
This assigns priority to the PS personality.
PCL
This assigns priority to the PCL personality.
PDF1.5
This assigns priority to the PDF1.5 mode.
NOTE
This function is not available when printing in the UFR II mode.
Initialize
—
The menu settings can be reset to the factory defaults by initializing the printer
settings.
If you select Initialize, the confirmation message <Is it OK to initialize the
settings?> is displayed. If you select [Yes], the settings are initialized. If you select
[No], the settings are not initialized.
IMPORTANT
Do not turn OFF the machine while the settings are being initialized, as doing so
may damage the machine's memory.