Canon IMAGE RUNNER 5075 - Manual (Page 173)

When a Message Is Displayed 6-5
6
Tro
uble
shootin
g
PDL IMG Work Memory Full Error Skip
Cause There is not enough memory necessary to process TIFF or JPEG images.
Remedy Cancel the job and try printing the data again.
PDL L. PAPER+1200dpi Err
Cause There is not enough memory necessary to process printing because
'Resolution' is set to [1200 dpi] when printing on large scale paper.
Remedy Set 'Resolution' in the printer driver to [600 dpi] and print again.
NOTE
You can also perform the same procedure from the touch panel display. (See
"Resolution" on p. 3-15.)
PDL Macro Memory Full Error Skip
Cause The machine's memory space allocated for macros is full and printing cannot
proceed.
Remedy Change the macro setting in the printer driver and try printing again.
Alternatively reduce the complexity of the print job by reducing the number of
macros that need to be downloaded to the machine.
PDL Memory Full Error Skip
Cause The machine's memory is full and printing cannot proceed.
Remedy Change the mode setting in the printer driver and try printing again, or reduce
the complexity of the print job by reducing the number of fonts, macros, images,
or patterns that need to be downloaded to the machine.
PDL Pattern Memory Full Error Skip
Cause The machine's memory space allocated for patterns is full and printing cannot
proceed.
Remedy Change the pattern setting in the printer driver and try printing again.
Alternatively reduce the complexity of the print job by reducing the number of
patterns that need to be downloaded to the machine.